Ratoc Systems PCIFW1U - Manual (Page 20)

W
indows2000
17
5.If there is a NEC Firewarden OHCI Compliant IEEE 1394 Host Controller string
without any yellow “!” marks or red “X” marks under the IEEE 1394 Bus host controllers,
the OHCI driver for the PCIFW1U is installed correctly.
Check here
Click here
Step2.Verify the OHCI driver installation
When you install the PCIFW1U into a PCI slot, the OHCI driver is installed
automatically by the Hardware Wizard.To verify the OHCI driver Installation, follow steps
through.
1.Click My Computer with the right button of the mouse.
2.Select Properties.
3.You will see the screen below. Click the Hardware tab.
4.Click the “Device Manager” button.