Ratoc Systems PCIFW1U - Manual (Page 78)

75
10-2.When you fail to install DVCAM driver(sonydvcr.sys).
If the “Hardware Wizard” did not start at the first time as described in page 21, please follow
steps through.
1.Open “Device Manager” window and find a “1394 Bus Controller” string.
2.Double-click it and make sure there is a “NEC Firewarden OHCI Compliant IEEE1394
Host Controller” string without any yellow “!” marks or red “X” marks.
3.Connect a DVCAM to the PCIFW1U and turn it on.
4.Find big yellow “?” marked “Other Devices” icon at the “Device Manager” window
as shown below and double-click it and find a “1394/A02d&10001” string.