Ratoc Systems PCIFW1U - Manual (Page 25)

W
indows98
22
3.When the following window appears, check “Specify a location” box and type
“D:\WIN98\NTSC”, where “D” means the CD-ROM drive. If your CD-ROM drive is not
“D”, you must replace “D” to the appropriate drive name. If you have a “PAL” model
DVCAM, please type “D:\WIN98\PAL”. NTSC is used in the U.S.A. PAL is used in
Europe and Asia(except Japan). Then insert the RATOC IEEE1394 PCI Board CD-ROM
into the CD-ROM drive and click [Next].
4.When the following window appears, click [Next].