Ratoc Systems PCIFW1U - Manual (Page 23)

20
3. Setup the 1394 Device
3-1.DVCAM Installation
This section describes how to connect a DVCAM and install the DV driver.
Connect the PCIFW1U and a DVCAM using a 1394 cable attached to the DVCAM as shown
below. And you must turn the DVCAM power switch on.
When your Windows version is Windows 98, go to the section 3-1-1.
When your Windows version is Windows 98 SE(Second Edition), go to the section 3-1-2.
When your Windows version is Windows 2000, go to the section 3-1-3.
When your Windows version is Windows Me(Millennium Edition), go to the section 3-1-4.