Ratoc Systems PCIFW1U - Manual (Page 76)

73
10. Troubleshooting
10-1.Camera can not be recognized
If your camera is recognized by our capture software(RsDvCap,RsDvStill), Camera list box in
RsDvCap or Camera Driver in RsDvStill shows the string such as Microsoft DV Camera
and VCR or Sony DV Camcorder. If the box is blank, camera is not recognized.
General Solution:
1.PCI Board is not firmly seated in the slot.
If your PCI Board is installed correctly, you will see the screen below in the Device Manager
and you can find a [NEC Firewarden OHCI Compliant IEEE1394 Host Controller] string.
Check here