Radio Shack CT-502 - Manual (Page 17)

17
• To set your phone so you can answer a call by pressing
keys other than just , see “Using Multiple Key
Answer” on Page 32.
• If you subscribe to calling line ID service through your
cellular carrier, you can view the calling party’s phone
number on the phone’s display. See “Viewing/Recalling
Messages” on Page 51.
• If your phone receives a call but the signal strength is too
weak to support it, Call appears as usual, but you hear
the phone sound a series of beeps (rather than ringing or
vibrating). The caller hears the standard “not in service”
message. If this happens, press
to clear Call from
the display.
Missed Call Message
If your phone is on and receives a call, but you do not answer
it,
Call appears on the display for about 15 seconds after
the calling party hangs up. The next time you press any key
(except , ,
or ), Call reappears for about 15
seconds to notify you that you missed a call.
To clear Call from the display, press or .
SND
CLR
CLR END PWR
CLR END
17-1111.fm Page 17 Wednesday, July 21, 1999 2:23 PM