Radio Shack CT-502 - Manual (Page 26)

26
USING THE MENU FUNCTIONS
Turning the Signal Strength Meter Off/On
Your phone is preset to display the signal strength meter
each time you turn on the phone, clear the display, or make a
call; however, you can set the phone so it does not display
the meter. Follow these steps to turn the signal strength
meter off or on.
1. Press . Signal Mtr On or Off flashes
2. Press so Off appears or so On appears.
3. Press to exit the functions menu. If you turned off
the signal strength meter, on appears on the display
instead of the signal strength meter.
Turning the Call-Time Reminder Tone Off/On
The call-time reminder function lets you set the phone to
sound a subtle tone 40 seconds after you place or answer a
call, then once every minute after that, to remind you of how
long you have been on the phone. Follow these steps to turn
the call-time reminder tone off or on.
1. Press .
2. Press once so One Min Timr Off or On flashes.
3. Press so On appears or so Off appears.
4. Press to exit the functions menu.
FCN NAME
MENU
CLR STO
END
FCN NAME
MENU
#
STO CLR
END
17-1111.fm Page 26 Wednesday, July 21, 1999 2:23 PM