Radio Shack CT-502 - Manual (Page 21)

21
If the call cannot be completed within 4 minutes (and Snd to
Redial appears again), you can press again to repeat
the redial cycle or to end the call.
DISPLAYING NUMBERS
Your Phone Number
To display your phone number at any time (even while a call
is in progress), simply press
.
Notes:
• If you have two phone numbers programmed into your
phone (see “Selecting the Active Phone Number” on
Page 55), pressing
displays the currently
active phone number.
• Unless you selected the silent scratchpad function (see
“Using Silent Scratchpad” on Page 27), the other party
on the line hears tones if you press these or any other
keys on your phone during a call.
A Number Longer than Seven Digits
You can enter and dial phone numbers of up to 32 digits;
however, the phone can display only 7 digits at once.
To review the overflow digits of a number 8–10 digits long,
press
once. Or, if the number is longer than 10 digits,
press twice. The phone displays the overflow digits (first
to last), up to 7 digits at a time.
SND
END
RCL #
RCL #
RCL
RCL
17-1111.fm Page 21 Wednesday, July 21, 1999 2:23 PM