Radio Shack CT-502 - Manual (Page 39)

39
ONE-TOUCH DIALING
To quickly place a call to any number stored in memory loca-
tions 02–09 (without pressing
), simply hold down that
number key for about 1 second. The InUse indicator flashes
and the phone briefly displays
Dialing then the number
called, then the signal strength meter.
SPEED RECALL/DIALING
If you know the memory number you want to use, simply en-
ter that number (such as 06), then press
to place the
call.
If you know the memory number you want to use, but you
want to review the stored information (just to be sure!) before
you place the call, press
then enter the memory location
number. The memory number and phone number flash on
the display. To place the call, press
.
The InUse indicator flashes and the phone briefly displays
Dialing , then the number called, then the signal strength
meter.
Notes:
• To view the name stored in a memory location when the
phone and memory numbers appear, press . To view
the numbers again, press .
• You can set the phone so it displays the name (instead of
the phone number) first when you select a specific mem-
ory location number. See “Turning the Number Display
Preference Off/On” on Page 33.
SND
SND
RCL
SND
RCL
RCL
17-1111.fm Page 39 Wednesday, July 21, 1999 2:23 PM