Positioning the printer safely, Environmental limit – Ricoh DDP 70e User Manual

Page 161

Advertising
background image

337922-002

Safety Information

9

Positioning the Printer Safely

To prevent the risk of electric shocks and personal injury, fire, and printer damage:

Switch off the printer before connecting the interface cable or optional accessory.

Place the printer on a level and sturdy surface that can withstand the printer’s
weight. If tilted, the printer may fall over and cause injuries.

Do not place the printer in a hot, humid, dusty, or poorly ventilated environment.

When moving the printer, be sure to unplug the power cord from the outlet. If the
printer is moved with the power cord connected, it can cause damage to the cord.

When moving the printer, do not tilt it more than 10 degrees. If tilted excessively,
the printer may fall over and cause injuries.

If you need to move the printer over a long distance, consult your Technical
Representative.

Environmental Limit

The printer is capable of operating normally within the following recommended
environmental limits:

Temperature range: 50°-89°F (10°-32°C).

Humidity range: 20-80% RH (no condensation).

Do not expose the printer to direct sunlight, or the printer's performance may
decline.

CAUTION

!

Do not place the printer near heaters or volatile, flammable, or
combustible materials.

NOTE

:

Sudden temperature fluctuations can affect print quality. Rapid heating of
a cold room can cause condensation inside the printer, directly interfering
with image transfer.

Advertising
This manual is related to the following products: