Booklet finisher error codes (option), Booklet finisher error codes (option) -15 – Ricoh DDP 70e User Manual

Page 99

Advertising
background image

Troubleshooting 5-15

Booklet Finisher Error Codes (Option)

When Invalid Booklet #xx or Invalid

Folder

#xx

is displayed on the

OCP, cancel the job and remove any remaining paper. Refer to the applicable error code
in the table below for a description of the problem. Resubmit the job after taking the
appropriate corrective action.

The following paper sizes and weights can be used when creating a booklet to be
Saddle Stitched.

Paper Size:
B5 (SEF), A4 (SEF), B4 (SEF), A3 (SEF), Letter (SEF), Folio (SEF), Legal (SEF),
Ledger (SEF), and Custom Size.

Custom Size:
Leading Edge (Width): 8.27 inch (210.0 mm) to 12.0 inch (304.8 mm).
Side Edge (Length): 7.2 inch (182.0 mm) to 18.0 inch (457.2 mm).

Paper Weight:
Bond: 16 to 53 lb (60 to 199 g/m

2

).

Index: 90 to 110 lb (163 to 199 g/m

2

).

Error Code

(#xx)

Description

#01

Single sheet booklet required.

#02

Mixed paper sizes requested in booklet.

#03

Uncollated set booklet required.

#04

Booklet
The print job is over 16 sheets or the thickness of the paper is over 1.7 mm.
Folding
The print job is over 3 sheets or the thickness of the paper is over 0.3 mm.

#05

FaceUp requested.

#10

Insert tray requested without Publishing Finisher present.

#11

Saddle Stitch requested without Publishing Finisher present.

#12

Invalid request for transparencies or labels in booklet.

#13

Invalid custom paper code requested for booklet.

#14

Unsupported paper code requested for booklet.

#15

Incorrect stacker requested for booklet (must be Booklet Stacker or AUTO).

#16

Incorrect stacker requested for Saddle Stitch booklet.

#17

Trimming requested without Booklet Stacker and Saddle Stitch.

#18

Tab Stock paper requested from an inserter tray.

Advertising
This manual is related to the following products: