Loading paper in tray 2 or 3, Loading paper in tray 2 or 3 -6 – Ricoh DDP 70e User Manual
Page 42
Advertising
3-6
Paper Handling
Loading Paper in Tray 2 or 3
1.
Open the tray.
2.
Adjust the size guide to the proper size. The available sizes are marked on the
bottom of the tray.
3.
Adjust the sensor plate to the proper size. Size markers are located on the sensor
plate in the following order: triangle (special), B5, A5, LGR, LGL, LTR, B4, A3,
and A4.
If the paper size you need is not listed, set the sensor plate to triangle (the first
position). Then, in Step 6, you will select the paper size from the OCP display.
Advertising