Ricoh DDP 70e - Manual (Page 90)

5-6 Troubleshooting
Elevator Tray Paper Full
Remove Paper
E009
The output tray of the Advanced
Finisher is full.
Remove paper from the elevator tray.
Elevator Tray Paper Full
Remove Paper
E00A
Paper did not stack properly in the
output tray of the Advanced Finisher.
Remove paper from the elevator tray.
Enter new password
Passwords are for use by System
Administrators and Service
Technicians only.
Contact your System Administrator for
additional information.
Enter new password again
Passwords are for use by System
Administrators and Service
Technicians only.
Contact your System Administrator for
additional information.
Enter service password
You must provide the service
password to gain access to the
selected menu item. Contact your System Administrator if
you need access to menu items that
are password protected.
Enter system password
You must supply the system password
to gain access to the selected menu
item. Contact your System Administrator if
you need access to menu items that
are password protected.
Entrance Paper Guide Open
Close Guide
The Entrance Paper Guide is located
behind Front Cover R of the Publishing
Finisher.
Close the guide completely, then close
the cover.
Finisher Front Cover Open
Close Cover
E03F
The front cover of the Advanced
Finisher is open.
Close the cover.
Front Cover Open
Close Cover
E043
Self-explanatory. Close the cover.
Fuser Unit End of Life
Replace Fuser Unit
E015
The fuser unit needs to be replaced.
Contact your authorized Service
Technician.
Fuser Web End of Life
Replace Fuser Web
E014
The fuser cleaning web needs to be
replaced. Contact your authorized Service
Technician.
HCF Open
Close Tray
E023
The door of the high capacity feeder is
open.
Close the door.
HCF Top Cover Open
Close Cover
E046
Self-explanatory. Close the cover.
Heater Off Mode Status message None
Input Keycode
A valid keycode is required to activate
this feature. Contact your System Administrator or
authorized Service Technician.
Input Station Cover Open
Close Cover
E044
The IS cover is also referred to as the
vertical path cover.
Close the cover.
Insufficient Disk Space
One Copy Job
There is not enough space for the
requested operation. Only one copy is
printed.
Increase disk space or send job
multiple times.
Invalid Booklet
Clear Paper Path The Publishing Finisher cannot
perform the operation.
Remove the remaining paper.
Invalid Booklet
Cancel Job The Publishing Finisher cannot
perform the operation.
Cancel the job.
Invalid Combination #1
Cancel Job
Incorrect stacker choice requested.
(Cannot deliver to Upper Tray from
Inserter.)
Cancel the job.
Message Description Corrective Action