Roland HPi-7LE - Manual (Page 22)

22
Playing Along With A Song
Assigning Markers to a Song for Repeated Practice
You can add markers within a song so that you can move to a marked measure, or play back repeatedly
between two markers.
fig.panelmark
Before you begin, select the song in which you want to assign markers (p. 17).
Access the Marker screen
1
Press the [Marker/Count] button. In the Count screen, press the [ ] button.
fig.marke
Move to the location at which you want to assign a marker.
2
Use the [ (Bwd)] [ (Fwd)] buttons to move to the measure at which you
want to assign a marker.
Assign a marker
3
Press the [ ] or [ ] button to assign marker A or B.
The screen will indicate the number of the measure at which the marker was assigned.
It is not possible to assign marker B at the same location or earlier than marker A.
→ Markers can also be assigned in units of beats rather than measures. Refer to “Assigning a marker in the middle of
a measure (Resolution)” (p. 23).
3 2 1
Return to the previous screen
Make detailed settings
for the resolution
For details refer to p. 22.
Set marker A, move to marker A.
Set marker B, move to marker B.
Switch “Repeat” on/off
Delete a marker
Marker B
Indicates the measure number at
which marker B was assigned. Marker A
Indicates the measure
number at which
marker A was
assigned.
Repeat
If this is “On,”
playback will
repeat between
markers.
HPi-7_e.book 22 ページ ２００５年１月１８日 火曜日 午後４時３９分