Roland HPi-7LE - Manual (Page 42)

42
Saving Your Performance
First make sure that the protect tab of the floppy disk is in the “Write (write enable)” position.
fig.DiskProtecte
1
Insert the floppy disk into the disk drive.
2
Press the [Function] button, and select “File” in the screen, and press the
[ (Enter)] button.
3
Use the [ ] [ ] buttons to select “Format,” and press the [ (Enter)] button.
fig.formate
4
Use the [ ] [ ] buttons to select “OK”, then press the [ (Execute)] button.
* Do not remove the floppy disk from the disk drive until formatting is complete.
Saving Songs
When saving to floppy disks, first make sure that the protect tab of the floppy disk is in the “Write
(write enable)” position, then insert the floppy disk in the disk drive.
1
Press the [Function] button, and select “File” in the screen, and press the
[ (Enter) ] button.
2
Use the [ ] [ ] buttons to select “Save,” and press the [ (Enter)] button.
fig.disksave1e
Rear side of the disk
Write
(can write new data onto disk)
Protect
(prevents writing to disk)
Write Protect Tab
Proceed to the
next screen
Return to the
previous screen
Change the setting
Change the item
to set
HPi-7_e.book 42 ページ ２００５年１月１８日 火曜日 午後４時３９分