Roland HPi-7LE - Manual (Page 59)

59
Convenient Functions
Recording
Use the [ (Bwd)] or [ (Fwd)] buttons to
move to the measure you want to record.
Set the recording tempo and metronome.
1 Press the [ (Record)] button.
The HPi-7 goes into record standby.
2 Press the [ (Play/Stop)] button to start recording.
Two measures of the count-in sound is played, and the
recording begins.
3 Press the [ (Play/Stop)] button to stop recording.
Making Part Settings
This makes more detailed settings for the parts.
1 Select the part you want to edit, then press the
[ (Options)] button.
The following screen will appear.
2 Press the [ ] or [ ] button to select the parameter,
then change the value with the [+] or [-] buttons.
Formatting the User Memory
(Initialize User Memory)
The HPi-7 features an internal storage area where you can save
recorded performances and User Styles. This space is called the
“User Memory.”
The following content is stored to the user memory.
• Content registered to the “Favorites”
• Image files set with the “User Image Display”
To delete all of the content held in the user memory and restore
the original factory settings, carry out the following procedure.
1 In step 2 on p. 54, select “Initialize User Memory” and
press the [ (Enter)] button, and a message will be
displayed.
2 Use the [ ] or [ ] buttons to select “OK,” then press
the [ (Execute)] button to carry out the Initializing
procedure.
* Never turn off the power while the display indicates
“ Executing.... ” Doing so will damage the HPi-7’s internal
memory, making it unusable.
Carrying out this operation does not initialize any settings other
than the user memory settings. To restore settings other than
those for the user memory to the original factory settings, carry
out Factory Reset.
Remembering the settings even when
the power is turned off
(Memory Backup)
Normally, the settings of the various variations will revert to
their default values when the power is turned off. However, you
can specify that the various settings will be remembered even
when the power is turned off.
This function is called “Memory Backup.”
1 In step 2 on p. 54, select “Memory Backup” and press
the [ (Enter)] button, and a message will be
displayed.
2 Use the [ ] or [ ] buttons to select “OK,” then press
the [ (Execute)] button to carry out the Memory
Backup procedure.
Display Description
Volume Changes the volume level.
Reverb
Changes the amount of reverb effect
applied to the sound.
Chorus Changes the amount of chorus applied.
Panpot
Shifts the direction from which the sound is
heard between left and right.
Press the [+] button to shift the sound to the
right, or press the [-] button to shift it to the
left.
What’s Panpot?
Panpot is the control that determines the placement of
the sound in the stereo sound field between left and
right speakers. By altering the Panpot setting, you can
change the perceived location of the sound between the
left and right speakers.
HPi-7_e.book 59 ページ ２００５年１月１８日 火曜日 午後４時３９分