Roland HPi-7LE - Manual (Page 60)

60
Convenient Functions
Stored contents
Master Tune, Stretch Tuning, Temperament, Key (p. 55)
Lid, Damper Resonance, Hammer Response, String Resonance
(p. 55)
Key Touch (p. 25)
Metronome Sound (p. 20)
Count In Sound, Countdown Sound, Count In Measure (p. 21)
Language (p. 56), Track Assign (p. 57), Reverb Switch, Reverb
Depth (p. 55)
* Never turn off the power while the display indicates “Writing...”
Doing so will damage the HPi-7’s internal memory, making it
unusable.
→ The settings for the following parameters are saved even without
Memory Backup.
Auto Demo (p. 57), USB Driver (p. 63)
Restoring the factory settings (Factory
Reset)
The memory backup settings can be restored to the factory-set
condition. This operation is referred to as “Factory Reset.”
1 In step 2 on p. 54, select “Factory Reset” and press the
[ ] button, and a message will be displayed.
2 Use the [ ] or [ ] buttons to select “OK,” then press
the [ (Execute)] button to carry out the Factory Reset
procedure.
Once the Factory Reset has been completed, switch the power
off, then on again.
* Never turn off the power while the display indicates
“ Executing.... ” Doing so will damage the HPi-7’s internal
memory, making it unusable.
Using the V-LINK function
Connecting the HPi-7 to a V-LINK compatible image device
allows you to control the images with the HPi-7.
V-LINK ( ) is functionality promoted by Roland
that allows linked performance of music and visual material. By
using V-LINK-compatible video equipment, visual effects can be
easily liked to, and made part of the expressive elements of a
performance.
Refer to p. 54 for the procedure.
921
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power on
all devices before making any connections.
fig.V-LINKkey
While V-LINK is switched on, no sound is produced when you
press any of the twelve keys at the left end of the keyboard.
Changing the Tone Settings When
Playing Back Songs (Play Mode)
With the normal setting, GS tones (sounds that are compatible
with other GS instruments) will normally be used to play back
song data. By changing this setting, you can play back song
using HPi-7-specific tones for certain portions of the data.
Refer to p. 54 for the procedure.
* After changing this setting, try selecting the song once again.
Playing the Demos
You can play demo songs that give you an idea of the HPi-7’s
various functions.
1 Hold down the Track [4/Left] button and press the
[Wonderland] button.
The songs in the “Masterpieces” category are played back, and
the screens showing the HPi-7’s functions appear in sequence in
the display.
2 To delete a demo song, press the [ ] button.
→ You can set the HPi-7 so that the demo songs start playing
automatically in All Song Play if the instrument is not played or
adjusted for several minutes.
Setting Description
On
Switches to Image Control mode.
You can control images using the twelve keys at
the left end of the keyboard.
Off Cancels Image Control mode.
Setting Description
GS
Playback uses GS-compatible tones for
performances that sound like other GS
instruments.
HPi-7
Playback uses HPi-7 tones for greater
expressiveness. However, differences may appear
when playing back using devices other than the
HPi-7.
C1 D1 E1 F1 G1 A0
A0 – G1#
B0
HPi-7_e.book 60 ページ ２００５年１月１８日 火曜日 午後４時３９分