Roland HPi-7LE - Manual (Page 27)

27
Adding Variety to Your Performances
Applying Effects to the Sound
fig.paneleffect
Adding reverberation to the sound (Reverb)
By applying the reverb effect you can produce a pleasant reverberation, making it sound as though you
were performing in a concert hall.
1
Press the [Reverb] button.
The button’s indicator will light, and a reverb effect will be applied to the sound.
To cancel the reverb effect, press the [Reverb] button, getting its indicator to go dark.
* It is not possible to memorize the reverb effect setting for each sound.
Adding richness to the sound (Chorus)
By applying the chorus effect you can make the sound richer and more spacious.
1
Press the [Chorus] button.
The button’s indicator will light, and a chorus effect will be applied to the sound.
To cancel the chorus effect, press the [Chorus] button, getting its indicator to go dark.
* The chorus setting can be memorized for each sound. Turning off the power restores the original settings.
→ The depth of the reverb effect and chorus effect can be adjusted. Refer to “Adjusting the depth of the effects (Effect)”
(p. 55).
Playing Two Sounds Layered Together (Dual)
Simultaneously playing two sounds when one key is pressed is called “dual performance.”
1
Simultaneously press two of the [Tone] buttons.
Both of the button indicators will light. Of the two buttons, the sound of the left button will be “Tone
1,” and the sound of the right button will be “Tone 2.”
1 1
HPi-7_e.book 27 ページ ２００５年１月１８日 火曜日 午後４時３９分