Roland Digital Piano HP - Manual (Page 16)

16
Before You Begin Playing
Turning the Power On/Off
On
Off
1
2
Turning On the Power
NOTE
• Once the connections have been completed (p. 14), turn on power to your various devices in the order specified. By turning on devices in the wrong
order, you risk causing malfunction and/or damage to speakers and other devices.
• This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.
• Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down, you may still hear
some sound when the power is switched on, but this is normal, and does not indicate a malfunction.
1. Move the [Volume] slider all the way to the left to minimize the volume .
2. Press the [Power] switch .
The power will turn on, the music rest screen will show an opening animation, and then the notation screen (p. 20) will appear.
3. Use the [Volume] slider to adjust the volume “Adjusting the Sound’s Volume” (p . 16) .
Turning the Power Off
1. Move the [Volume] slider all the way to the left to minimize the volume .
2. Press the [Power] switch .
The screen goes blank and the power is turned off.
MEMO
If you need to turn off the power completely, first turn off the [Power] switch, then unplug the power cord from the power outlet.
Refer to “Power Supply” (p. 8).
Adjusting the Sound’s Volume
Here’s how to adjust the volume of your keyboard playing or the playback volume of an internal song or USB memory song.
If headphones are connected, use the [Volume] slider to adjust the headphone volume.
1
Min Max
1. Turn the [Volume] slider to adjust the overall volume .
Adjust the volume while you play the keyboard to produce sound.