Roland Digital Piano HP - Manual (Page 35)

35
Performing
Changing the Tones of the Right and Left-hand Areas
2
1
1. Use the cursor buttons to select the “right-hand tone” or “left-hand tone .”
2. Use the cursor up/down buttons to select the desired tone .
MEMO
If you want to switch tone groups, press a tone button while “left-hand tone” or “right-hand tone” is selected. Use the cursor up/down buttons to
select tones within the selected tone group.
MEMO
The pitch of the left-hand tone can be changed one octave at a time. This is called the “Octave Shift” function. To make settings for “Octave Shift,”
carry out the following steps.
1. Press the [Function] button ➝ [Octave Shift] ➝ [O] button (p. 24).
2. Use the cursor up/down buttons to adjust the pitch.
Changing the Split Point
1. Use the cursor buttons to select the split point .
2. Press the up or down cursor button .
The split point will change. The split point can be adjusted in the range of B1–B6.
MEMO
• The modified setting will return to its original state when you turn off the power.
• If you want, you can have the settings be retained even while the power is turned off (p. 31).
Cancelling Split Play
1. Press the [Split] button to turn off its illumination .