Changing the tones for dual play, Adjusting the balance of the two tones, Cancelling dual play – Roland Digital Piano HP User Manual
Page 33
33
Performing
Changing the Tones for Dual Play
2
1
1. Use the cursor left/right buttons to choose “tone 1” or “tone 2 .”
2. Use the cursor up/down buttons to select the desired tone .
You can select tones from within the same tone group.
MEMO
The pitch of Tone 2 can be changed one octave at a time. This is called the “Octave Shift” function. To make settings for “Octave Shift,” carry out the
following steps.
1. Press the [Function] button ➝ [Octave Shift] ➝ [O] button (p. 24).
2. Use the cursor up/down buttons to adjust the pitch.
Adjusting the Balance of the Two Tones
When using Dual Play, you can adjust the volume balance of tone 1 and tone 2.
1. Use the cursor left/right buttons to choose “Dual Balance .”
2. Use the cursor up/down buttons to adjust the dual balance .
The volume balance will change.
Cancelling Dual Play
1. Press either one of the tone buttons .
Only the tone of the button you pressed will be heard.