Connecting to midi devices, Connecting the hpi-7f to a midi sequencer, Playing a midi sound module from the hpi-7f – Roland Digital Piano HP User Manual

Page 86: Playing a midi sound module from, The hpi-7f, Ta (p. 86), What’s midi, Caution when connecting a midi device, Connections, Connecting other devices

Advertising
background image

86

Connecting Other Devices

Connecting to MIDI Devices

By connecting an external MIDI device and exchanging performance

data, you can control one device from the other.
For instance, you can output sound from the other instrument or

switch Tones on the other instrument.

What’s MIDI

MIDI, short of “Musical Instrument Digital Interface,” was developed as

a universal standard for the exchange of performance data between

electronic instruments and computers.
The HPi-7F is equipped with MIDI connectors to let it exchange

performance data with external devices. These connectors can be used

to connect the HPi-7F to an external device for even greater versatility.

Caution when connecting a MIDI device

To prevent malfunction and damage to your speakers, always be sure

to turn the volume all the way down on all your equipment, then

switch the power off on everything before you make any connections.

Connecting the HPi-7F to a MIDI Sequencer

Make these connections if you want your performance on the HPi-7F

to be recorded on the MIDI sequencer, or a recorded performance to

be played back by the sequencer.

MIDI cable

MIDI sequencer

OUT

MIDI

IN

NOTE

When the HPi-7F is connected to a MIDI sequencer, set it to “Local

Off” (p. 87).

Playing a MIDI Sound Module from

the HPi-7F

Make these connections if you want performance data from the HPi-7F

to be sent to a MIDI sound module, causing the MIDI sound module to

produce sound.

MIDI cable

MIDI sound module

THRU

OUT

MIDI

IN

Connections

1. Minimize the volume of the HPi-7F and of the MIDI device .
2. Turn off the power of the HPi-7F and of the MIDI device .
3. Use a separately sold MIDI cable to connect the HPi-7F to the

MIDI sound module (see illustration) .

4. Turn on the power of the HPi-7F and of the MIDI device .
5. Adjust the volume of the HPi-7F and of the MIDI device .
6. Set the MIDI transmit channel if necessary .

MEMO

For the MIDI transmit channel setting, refer to “Changing the MIDI

Transmit Channel (MIDI Transmit Channel)” (p. 87).

Advertising