Radio Shack TAD-1006 - Manual (Page 23)

23
• If you hang up the phone without
pressing ON/OFF , the TAD-1006
might continue to record.
To play back a recorded conversation,
see “Playing 2-Way Conversations”
on Page 24.
RECORDING A MEMO
A memo is a message that you record
by speaking directly at the TAD-1006,
without calling in on the phone line.
1. Press and hold MEMO until the
TAD beeps. The ANSWER indica-
tor flashes and the MEMO indica-
tor lights steadily.
2. Release MEMO and record your
message. Speak toward the front
of the TAD-1006 from about 12
inches away.
3. When you finish speaking, press
ON/OFF . The TAD beeps once,
then the MEMO indicator flashes
to indicate that you have a memo.
To play back a memo, see “Playing
Memos” on Page 24.
PLAYING MESSAGES
Notes:
• During playback of any message
type (incoming message, memo,
or 2-way conversation), you can
repeat the current message or
skip backward or forward to the
previous or next message.
— To repeat the current message,
press REPEAT .
— To skip back to the previous
message, press LAST .
— To skip forward to the next
message, press NEXT .
• To delete any type of message,
see “Deleting Messages” on
Page 25.
• To stop playback of any message
at any time, press ON/OFF .
illustration
illustration
43-768.fm Page 23 Friday, August 13, 1999 2:49 PM