Keyboard (p. 19), P. 19 – Roland HP107 User Manual

Page 19

Advertising
background image

19

Chapter 2. Performance

Making Fine Adjustments to the Piano

Sound (Piano Resonance)

You can make fine adjustments to the sound of the piano as desired.

fig.panel2-8

Playing Sounds When the Keys Are Released
(Key Off)

You can play the “key off” sound (the subtle sound produced when the keys are

released) obtained when playing an acoustic piano.

1

Press the Piano Resonance [Key Off] button, getting its indicator to light.

A distinctive sound results when you release the keys.

Press the Piano Resonance [Key Off] button once more, causing the button’s

indicator to go off, and the effect is cancelled.

Adjusting the Volume of the Key Off Sound

2

Hold down the Piano Resonance [Key Off] button and press the [-] or [+]

button.

You can set the volume of the sound heard when the keys are released to any of ten

different levels.

The volume increases as the value is raised.

Producing the Resonance of the Strings When
the Keys Are Played (String Resonance)

When you play the keys on an acoustic piano, the strings that are already playing

resonate as well. The function that reproduces this effect is called “String

Resonance.”

1

Press the Piano Resonance [Sting] button, getting its indicator to light.

The String Resonance function is switched on.

Press the Piano Resonance [String] button once more, causing the button’s indicator

to go off, and the effect is cancelled.

Adjusting the Depth of the Resonance

2

Hold down the Piano Resonance [String] button and press the [-] or [+]

button.

You can adjust the resonance depth (the volume of the resonance) to any of ten

levels.

More resonance effect is applied as the value is increased.

You can save this setting in the

HP107’s memory using the

Memory Backup function (p.

45).

For more about the tones with

which this setting is enabled,

refer to the “Tone List” (p. 52).

NOTE

This setting is enabled only

with the piano tones. You

cannot set this for other tones.

You can save this setting in the

HP107’s memory using the

Memory Backup function (p.

45).

HP107_e.book 19 ページ 2005年7月25日 月曜日 午後4時50分

Advertising