Roland HP107 - Manual (Page 29)

29
Chapter 2. Performance
Playing Two Sounds Together
(Dual Performance)
Simultaneously playing two tones when one key is pressed is called “Dual
performance.” You can select the tone you want to have layered by pressing the
corresponding tone button.
1
Simultaneously press the two Tone buttons that you want to play
together.
The indicator of the button you pressed will light.
When you play the keyboard, the tones of the two Tone buttons you selected will
sound simultaneously.
To cancel Dual performance, press any Tone button.
To change the tone of the right button of the two selected tones
2
Press the [-] or [+] button.
Dual performance now features the tone of the left side’s tone button along with the
newly selected tone.
To change the tone of the left button of the two selected tones
Cancel the Dual performance, and then re-select the tone. Press the two Tone buttons
that you want to play together.
■ Adjusting the volume balance in Dual
performance (Dual Balance)
You can change the volume balance between the two layered sounds in Dual
performance.
fig.panel2-2
1
Hold down the [Transpose] button, and press the [Split] button.
The indicators of the buttons you pressed will blink.
The current volume balance appears in the display.
2
Press the [-] or [+] button to change the value.
The volume balance changes.
To return to the original volume balance, press the [-] and [+] buttons simultaneously.
fig.disp-dualbal.e
Press any button other than the [-] [+] buttons, and the button’s indicator will return
to the previous state.
You can change the pitch of the
tone of the right button in
octave steps (p. 43).
1 2
You can save this setting in the
HP107’s memory using the
Memory Backup function (p.
45).
You can also change the
volume balance by holding
down the [Acoustic Layering]
button and pressing the [+] or
[-] button.
Volume of the left button tone Volume of the right button tone
HP107_e.book 29 ページ ２００５年７月２５日 月曜日 午後４時５０分