Selecting and recording the track for each, Hand separately” p. 39), To “selecting and recording – Roland HP107 User Manual
Page 39: The track for each hand, Separately” (p. 39)
39
Chapter 4. Recording Your Performance
Selecting and Recording the Track for Each
Hand Separately
The recorder of the HP107 has two recording tracks, allowing you to record the right
and left hands separately. Use the [Left] button or [Right] button to specify the
recording track.
If you want to re-do the recording, you can re-record just a specific track.
fig.panel4-4
When recording a new song, first follow the instructions in Steps 1 and 2 of
“Recording a New Song” (p. 37) to select “USr.” When layering recordings with
built-in songs or songs that have been backed up, select the built-in or backed up
song as described in Steps
1
and
2
of “Selecting a song and playing it” (p. 15).
1
As necessary, turn on the metronome (p. 32).
2
Press the [Rec] button.
The [Rec] button’s indicator will light, the [Play] button’s indicator will blink, and
you will be in recording-standby mode.
The button indicators of tracks that are already recorded will light.
The track button for which you will next be recording will be blinking.
3
Press the [Left] or [Right] button to turn off the button for the track not to
be recorded.
Start recording
4
Press the [Play] button.
Two measures of the count sound are played, and the recording begins. Go ahead
and perform on the keyboard.
Note that recording will also begin as soon as you play anything on the keyboard,
even if you do not press the [Play] button. There is no count sound played when you
start in this manner.
Stop recording
5
Press the [Play] or [Rec] button.
Recording will stop, and the indicators for the [Play] and [Rec] buttons will go dark.
Your performance has been recorded to the specified track button.
If you want to record on the other track, return to step 2 to record your performance
again. You can record while you listen to the previously recorded performance.
Play back the recorded performance
6
Press the [Play] button.
You will hear the recorded performance.
Press the [Play] button once again, and playback will stop.
The HP107 includes a “Song
which allows you to store the
song recorded with the HP107
in the instrument itself.
NOTE
If you go on to record
additional material without
erasing the recorded song, the
song tempo, beat, and
metronome settings of the
original recording will be used
for the new material as well.
3
1 4,6 2,5
The track buttons allow you to
record to either the [Left] or
the [Right] button, one at a
time.
HP107_e.book 39 ページ ２００５年７月２５日 月曜日 午後４時５０分