Ricoh SP C240SF - Manual (Page 354)

Energy Saver Mode
Item Description
Energy Saver Mode 1 Select [Active] to set the machine to enter Energy Saver mode 1 if the
machine has been idle for about 30 seconds.
It takes less time to recover from Energy Saver mode 1 than from power-off
state or Energy Saver mode 2, but power consumption is higher in Energy
Saver mode 1 than in Energy Saver mode 2.
Energy Saver Mode 2 Select [Active] to set the machine to enter Energy Saver mode 2 after the
period of time specified for [Waiting Time (1-240)] is passed (1 to 240
minutes).
The machine consumes less power in Energy Saver mode 2 than in Energy
Saver mode 1, but it takes longer to recover from Energy Saver mode 2
than from Energy Saver mode 1.
• The machine recovers from Energy Saver mode when it receives a print job, prints a received fax,
or when the [Copy], [Color Start], or [B&W Start] key is pressed.
8. Configuring the Machine Using Web Image Monitor
352
8