Ricoh SP C240SF - Manual (Page 386)

Message Causes Solutions
ADF Original
Misfeed
Open ADF Cover
and
Remove paper.
An original has been jammed
inside the ADF.
• Remove jammed originals, and then
place them again. See p.364
"Removing Scanning Jams".
• Check the originals are suitable for
scanning. See p.122 "Placing
Originals".
Almost Full
Waste Toner Bottle
The waste toner bottle is almost
full.
Prepare a new waste toner bottle.
Available: 2 Sided
Copy
A4/B5/LG/LT/EXE
F/Folio/FoolScap/
16K
2-sided copy could not be
performed because the tray
does not contain the valid size
paper, which are A4, B5, Letter,
Legal, Executive, 8" Ч 13",
8
1 /
2
" Ч 13", Folio, or 16K.
• Specify the tray containing the A4,
B5, Letter, Legal, or Executive size
paper (other than the bypass tray) in
the [Select Paper] setting. See p.253
"Copy Settings".
• Specify the A4, B5, Letter, Legal,
Executive, 8" Ч 13", 8 1 /
2
" Ч 13",
Folio, or 16K size for the tray
selected for printing copies. See
p.274 "System Settings".
Available: 2 Sided
Copy Tray 1 or Tray
2 2-sided copy could not be
performed because paper is set
to be fed from the bypass tray. Specify a setting other than [Bypass Tray]
for the [Select Paper] setting. See p.253
"Copy Settings".
Available: IDCard
Copy A4 or 8 1/2 x
11
ID card copy could not be
performed because the tray
does not contain the valid size
paper, which are A4 or Letter
size.
• Set the machine to print copies using
the A4 or Letter size paper in the
[Select Paper] setting. See p.253
"Copy Settings".
• Specify the A4 or Letter size paper for
the tray selected for printing copies.
See p.274 "System Settings".
Cannot Copy This
Setting
Comb.: 2 on 1 / 4
on 1
2-in-1 or 4-in-1 copy could not
be performed because the tray
does not contain the valid size
paper, which are A4, Letter, or
Legal size.
• Set the machine to print copies using
the A4, Letter, or Legal size paper in
the [Select Paper] setting. See p.253
"Copy Settings".
• Specify the A4, Letter, or Legal size
paper for the tray selected for printing
copies. See p.274 "System Settings".
9. Troubleshooting
384
9