Connecting with a network cable – Ricoh SP C240SF User Manual
Page 71
3.
When a digital camera is not connected to the machine, store the USB cable in a location
where it will not be damaged.
• For details about the printing method, see p.149 "PictBridge Printing".
• Make sure to close the cover of the USB flash disk port after use.
Connecting with a Network Cable
Follow the procedure below to connect the machine to a computer through a network.
Prepare the hub and other network devices before connecting the 10BASE-T or 100BASE-TX cable to
the machine's Ethernet port.
• Do not connect the Ethernet port of the machine to a network that may supply excess voltage,
such as a telephone line. Doing so may result in fire or electric shock
• Use shielded Ethernet cable. Unshielded cables create electromagnetic interference that could
cause malfunctions.
• The Ethernet cable is not supplied with this machine. Select your cable according to the network
environment.
1.
Remove the cable cover.
CES068
Connecting the Machine
69
2