Ricoh Fax 2210L - Manual (Page 154)

T ROUBLESHOOTING 8.8
Clearing LCD Error Messages
Messages appears on the display to indicate the control panel to
indicate the machine’s status or errors. Refer to the following
table to understand the message’s meaning and correct the
problem, if necessary. Messages and their meanings are listed
in alphabetical order.
Display Meaning Suggested solutions
Cancel ?
1:Yes 2:No
Your machine’s memory
is full during the machine
stores the document into
the memory. To cancel the fax job, press the 1
button to accept “Yes.”
If you want to send the pages
were stored, press the 2 button
to accept “No.” You should send
the remaining pages later when
the memory is available.
[Comm. Error]
The machine has a
communication problem. Ask the sender to try again.
CRU Fuse Error
The machine has a
problem with recognizing
the new toner cartridge. Please contact a service
representative.
[Document Jam]
The loaded document has
jammed in the ADF
(Automatic Document
Feeder). Clear the document jam. See
page 8.2.
[Door Open]
The front or rear cover is
not securely latched. Close the cover until it locks into
place.
Group Not
Available
You have tried to select a
group location number
where only a single
location number can be
used, such as when
adding locations for a
broadcasting operation. Just use a one-touch or speed
dial number or dial a number
manually using the number
keypad.
[Incompatible]
The remote machine does
not have the requested
feature, such as a
delayed transmission.
It also occurs if the
remote machine does not
have enough memory
space to complete the
operation you are
attempting.
Reconfirm the remote machine’s
features.