Ricoh Fax 2210L - Manual (Page 179)

A.11
A
Labels (for MFP model only)
C AUTIONS :
• To avoid damaging the machine, use only labels recommended for laser printers.
• To prevent serious jams, always use the manual feeder to print labels and always use
the rear output tray.
• Never print on the same sheet of labels more than once and never print on a partial
sheet of labels.
When selecting labels, consider the quality of each component:
• Adhesives: The adhesive material should be stable at 180°C (356°F), the
machine’s fusing temperature.
• Arrangement: Only use labels with no exposed backing between them. Labels can
peel off sheets with spaces between the labels, causing serious jams.
• Curl: Prior to printing, labels must lie flat with no more than 13mm (5in.) of curl in
any direction.
• Condition: Do not use labels with wrinkles, bubbles or other indications of
separation.
Transparencies (for MFP model only)
Transparencies used in the machine must be able to withstand 180°C (356°F), the
machine’s fusing temperature.
C AUTION : To avoid damaging the machine, use only transparencies recommended for
use in laser printers.