Ricoh Fax 2210L - Manual (Page 24)

G ETTING S TARTED 1.10
Handset and Handset Cradle ( for America only)
1 Plug the end of the coiled cord of the handset into the jack
on the left side of your machine.
2 Holding the cradle as shown, attach the handset cradle to
the machine.
➀ I nsert the two tabs of the cradle into the slots on the left side of
the machine as shown.
➁ Push the cradle toward the machine until it locks into place.
N OTES :
• The cradle and handset must be installed for correct operation of the set.
• To remove the cradle, push it down,
pressing the latch on the bottom
of the cradle .