Ricoh Aficio 8060 - Manual (Page 69)

Messages Displayed When Using the Printer Function
61
4
Print overrun. Images were discarded
while printing. On the RPCS printer driver's [Print
Quality]
tab, open the [Change User
Settings...] dialog box, and then, on
the [Image Adjustments] tab, specify a
lower value for “Resolution”.
Problem: Printer
Font Error
An error has occurred in
the font settings. Contact your service representative.
Punch has been
cancelled.
Punch printing was can-
celed. Check the paper orientation, print
orientation, and punch position.
Certain settings can produce print
results that might not be as expected.
Receiving data
failed.
Data reception was abort-
ed. Resend the data.
Sending data
failed.
The machine received a
command to stop trans-
mission from the printer
driver. Check if the computer is working
correctly.
Staple has been
cancelled.
Stapling printing was can-
celed. Check the paper orientation, paper
quantity, print orientation, and sta-
ple position. Certain settings can
produce print results that might not
be as expected.
The entered pass-
word is incorrect.
The password of the en-
crypted PDF file has been
entered incorrectly. Enter the correct password.
The print job has
been cancelled be-
cause capture
file(s) could not
be stored: Exceed-
ed max. memory.
The HDD became full after
a file was stored. Delete the files stored in the docu-
ment server or reduce the file size to
be sent.
The print job has
been cancelled be-
cause capture
file(s) could not
be stored: Exceed-
ed max. number of
files.
The maximum file capacity
of the document server
was exceeded. Delete the files stored in the docu-
ment server.
The print job has
been cancelled be-
cause capture
file(s) could not
be stored: Exceed-
ed max. number of
pages per file.
The maximum page capac-
ity of the document server
was exceeded. Delete some of the files stored in the
document server or reduce the
number of pages that you want to
send.
Message Cause Solution