Guide to components – Ricoh AFICIO 180 User Manual
Page 17
1
Guide to Components
1.
Platen cover (option) or Document
Feeder (ADF) (option)
Lower the platen cover over originals
placed on the exposure glass for copying. If
you have the document feeder, insert a
stack of originals here. They will be fed au-
tomatically.
(The illustration shows the document feeder.)
2.
Exposure glass
Position originals here face down for copy-
ing. See
3.
Internal tray
Copied paper is delivered here face down.
4.
Main power switch
The Machine with copy feature only:
Turn on this switch to activate the machine.
Turn off this switch to shut off.
The Machine with fax or printer option:
Do not touch this switch. This switch is
used only by a service representative when
the optional fax unit is installed.
Note
❒ If the machine does not operate after
turning on the operation switch, check if
the main power switch is turned on. If it
is off, turn it on.
5.
Operation switch
The Machine with fax or priner option:
Press this switch to turn the power on (the
On
indicator lights up). To turn the power
off, press this switch again (the On indica-
tor goes off).
6.
Operation panel
See
7.
Internal tray 2 (option)
You can specify a tray to which documents
are delivered for each mode (copy, facsimi-
le, and printer.)
8.
Paper tray (Tray 1)
Set paper here. See
9.
Paper tray unit (Tray 2, 3) (option)