Ricoh AFICIO 180 - Manual (Page 59)

Copying from the Bypass Tray
43
2
E Press the
[Exit] key.
Reference
To go on to specify a paper
size, press the [Pap. Size]] key.
See
⇒
P.40 “When copying
onto custom size copy paper”.
See
⇒
P.41 “When copying
onto standard size copy paper”.
E
Set your originals, then press the
{{{{
Start
}}}} key.
Important
❒ When copying onto OHP trans-
parencies, remove copied sheets
one by one.
Note
❒ Push on the engraved center
point of the bypass tray to close it.
When Copying onto
Envelopes
Important
❒ If you select Thick Paper as the Pa-
per Type setting and select Stand-
ard or Custom as the Paper Size
setting, these functions will remain
in effect even after Auto Clear or
pressing the
{
Clear Modes
} key.
You can alter this behavior by
changing “12. Reset Bypass Set”.
See
⇒
P.80 “1. General Features 3 /
4
”
Reference
For detail about the recommended
envelopes, see
⇒
P.17 “Copy Pa-
per”
A
Open the bypass tray.