Ricoh AFICIO 180 - Manual (Page 58)

Copying
42
2
D Select
[Std. size] with the
0 0 0 01 1 1 1
keys. Then press the [Custom]
key.
E Select the desired size with the
[NEXT] , [Prev.] or the
0 0 0 01 1 1 1 keys,
then press the [OK] key.
F Press the
[Exit] key.
When copying onto OHP
transparencies or thick paper
Important
❒ If you select Thick Paper/Spe-
cial Paper as the Paper Type set-
ting, these functions will remain
in effect even after Auto Clear
or pressing the
{
Clear Modes
}
key. You can alter this behavior
by changing “12. Reset Bypass
Set”. See
⇒
P.80 “1. General Fea-
tures 3 /
4
”
A Make sure the {{{{
Bypass
}}}} is se-
lected.
B Press the {{{{
#
}}}} key.
C Press the
[Pap. Type] key.
D Select
[Thick] with the
0 0 0 01 1 1 1
keys. Then, press the [OK] key.
Note
❒ Only select Special Paper
when you cannot make clean
copies. See
⇒
P.63 “If You
Cannot Make Clear Copies”