Ricoh AFICIO 180 - Manual (Page 53)

Sort
37
2
Sort
The machine can scan your originals
into memory and automatically sort
the copies.
There are two types in the Sort func-
tion:
❖ ❖ ❖ ❖ Sort
Copies can be assembled as sets in
sequential order.
❖ ❖ ❖ ❖ Rotate Sort
Every other copy set is rotated by
90
° KL and delivered to the copy
tray.
Limitation
❒ You cannot use the bypass tray
with this function.
Important
❒ If the number of delivered copies
exceeds the delivery tray capacity,
paper jam might occur. Remove
cpoies before the stack gets higher
than the copy delivery exit.
Note
❒ To switch among Sort and Rotate
Sort modes, access the user tools.
See “5. Sort” in
⇒
P.83 “2. Input/
Output”
❒ The maximum tray capacity is as
follows. When the number of cop-
ies exceeds the tray capacity, re-
move copies from the tray.
❒ The maximum tray capacity might
be less than the above when you
use the Rotate Sort.
❒ The maximum tray capacity might
also be reduced when copy paper
is considerably curled.
❒ The paper sizes that can be used in
Sort function are as same as the siz-
es applied to Tray 1, 2, or 3. See
⇒
P.17 “Copy Paper”
❒ The paper sizes that can be used in
Rotate Sort function are as follows:
❒ To use the Rotate Sort function,
two paper trays identical in size
and different in direction (
KL)
are required (the paper tray unit
(option) is required).
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3
2
1
3 2
1
3
Internal tray 1 250 sheets (80g/m 2 ,
20lb)
When Internal
tray 2 installed:
125 sheets (80g/m 2
, 20lb)
Internal tray 2 125 sheets (80g/m 2
, 20lb)
Metric version A4
KLB5KL
Inch version 8 1 /
2
"
×
11"
KL