Ricoh AFICIO 180 - Manual (Page 35)

Copy Paper
19
1
*1 When you set these custom size paper in the bypass tray, you have to specify the size.
See
⇒
P.39 “Copying from the Bypass Tray”
Important
❒ If you use damp or curled paper, a misfeed might occur. In such a case, try
turning over the paper stack in the paper tray. If there is no improvement,
change to copy paper with less curl.
Note
❒ Post cards should be fed from the bypass tray.
❒ If OHP transparencies and translucent paper gets double-fed, set pages one
sheet at a time.
❒ If you load paper of the same size and in the same direction in two or more
trays, the machine automatically shifts to another tray when the tray in use
runs out of paper. This function is called Auto Tray Switch. This saves inter-
rupting a copy run to replenish paper even when you make a large number
of copies. You can cancel this setting. See “13. Auto Tray Switch” of the Sys-
tem Settings.
Reference
If you want to add paper, see
⇒
P.66 “
B Loading Paper”.
If you want to change the paper size, see
⇒
P.72 “Changing the Paper Size”.
Bypass tray Metric version Inch version Paper weight Paper capacity
Custom size *1 Vertical: 90 –
305 mm
Horizontal: 148
– 1,260 mm
Vertical: 3.5" –
12.0" mm
Horizontal:
5.8" – 49.6" mm
52 – 157 g/m 2 ,
16 – 42 lb
10 sheet
Postcards, adhesive labels, trans-
lucent paper, OHP transparen-
cies
Custom size *1
Envelopes
Com#10 Env
241.3
×
104.8 mm, 9.5"
×
4.2"
72 – 90 g/m 2 ,
19 – 24 lb
C6 Env
162
×
114 mm, 6.4"
×
4.5"
DL Env
220
×
110 mm, 8.7"
×
4.4"
Monarch Env
190.5
×
98.4 mm, 7.5"
Ч
3.9"