Roland V-Synth - Manual (Page 51)

51
Creating a Patch
Creating a Patch
MFX To CHO (MFX Chorus Send Level)
Adjusts the amount of chorus for the sound that passes through
MFX. If you don’t want to add the Chorus effect, set it to “0.”
Value: 0–127
MFX To REV (MFX Reverb Send Level)
Adjusts the amount of reverb for the sound that passes through
MFX. If you don’t want to add the Reverb effect, set it to “0.”
Value: 0–127
CHO (Chorus On/Off Switch) ◆
Switches chorus on and off.
Value: (OFF), (ON)
CHO Type (Chorus Type)
Use this parameter to select from among the 8 available chorus. For
details on chorus parameters, refer to
“Chorus Parameters” (p.
138).
Value: 00 (Off)–08
CHO Master Level (Chorus Master Level)
Adjusts the volume of the sound that has passed through chorus.
Value: 0–127
CHO To REV (Chorus Reverb Send Level)
Adjusts the amount of reverb for the sound that passes through
chorus. If you don’t want to add the Reverb effect, set it to “0.”
Value: 0–127
REV (Reverb On/Off Switch) ◆
Switches reverb on and off.
Value: (OFF), (ON)
REV Type (Reverb Type)
Use this parameter to select from among the 10 available reverb. For
details on reverb parameters, refer to
“Reverb Parameters” (p. 138).
Value: 00 (Off)–10
REV Master Level (Reverb Master Level)
Adjusts the volume of the sound that has passed through reverb.
Value: 0–127
MFX
fig.03-29_50
MFX Type
Use this parameter to select from among the 41 available MFX. For
details on MFX parameters, refer to
“MFX Parameters” (p. 116).
Value: 00 (Thru)–41
In this setting screen, you can edit the parameters of the MFX that is
selected by the MFX Type setting. For details on the parameters that
can be edited, refer to
“MFX Parameters” (p. 116).
When you touch <List>, the MFX List window will appear,
allowing you to select the MFX from the list.
CHO
fig.03-30_50
CHO Type (Chorus Type)
Use this parameter to select from among the 8 available chorus. For
details on chorus parameters, refer to
“Chorus Parameters” (p.
138).
Value: 00 (Off)–08
In this setting screen, you can edit the parameters of the chorus that
is selected by the CHO Type setting. For details on the parameters
that can be edited, refer to
“Chorus Parameters” (p. 138).
When you touch <List>, the Chorus List window will appear,
allowing you to select the chorus from the list.