Roland V-Synth - Manual (Page 96)

96
Connecting to Your Computer via USB (USB Mode)
Exchanging MIDI Messages
with Your Computer (MIDI
Mode)
Driver Installation and Settings
In order to use the V-Synth as a USB MIDI device from your
computer, you must first install the USB MIDI driver. The USB MIDI
driver is on the included “V-Synth Driver CD-ROM.”
In order to use USB in MIDI mode, you must install the driver from
the included CD-ROM into your computer.
The correct driver and the installation procedure will depend on
your system and on the other programs you are using. Be sure to
read the Readme file on the CD-ROM before installation.
Windows XP/2000
→
\Midi\Usb_xp2k\Readme_e.htm
Windows Me/98/98SE
→
\Midi\Usb_me98\Readme_e.htm
Mac OS 9 (9.04 or later)
→
\OS_9\English\Readme_OMS-E.HTM
→
\OS_9\English\Readme_FM-E.HTM
Mac OS X
→ \OS_X\Readme-E.HTM
What is the USB MIDI Driver?
The USB MIDI Driver is a software which passes data between
the V-Synth and the application (sequencer software, etc.) that
is running on the USB-connected computer.
The USB MIDI Driver sends data from the application to the V-
Synth, and passes data from the V-Synth to the application.
fig.07-08.e
USB connector
USB cable
USB connector
V-Synth
Application
USB
Driver
Computer