Roland V-Synth - Manual (Page 98)

98
Other Functions
Reset to Default Factory
Settings (Factory Reset)
This restores all data in the V-Synth to the factory-set condition
(Factory Reset).
If there is important data you’ve created that’s stored in the V-
Synth’s internal memory, all such data is discarded when a
Factory Reset is performed. If you want to keep the existing data,
save it on a PC card (p. 85), USB backing up onto a computer (p.
94) or transmit it to an external MIDI device and save it (p. 97).
1. Press [MODE].
The V-SYNTH MODE MENU window appears.
fig.MODE_50
2. Touch <FACTORY RESET>.
The Factory Reset screen appears.
fig.08-03_50
3. Touch <Execute> to execute the Factory Reset.
When the display indicates “COMPLETED!,” the factory reset
operation has been completed.
Viewing Various Information
(Info)
1. In the upper right of the screen, touch < ▼ >.
A pulldown menu appears.
fig.01-05_50
2. In the pulldown menu, touch <Info>.
The PATCH Information window appears.
fig.08-04_50
This window shows the following information.
Version: The V-Synth’s program version
Part: The number and name of the patch assigned to each part
3. When you have finished viewing the information, touch
<OK> to close the window.