Renesas M3A-HS85 - Manual (Page 30)

Functional Overview
2.9 Reset Module
Rev.1.04 2008.7.10 2-14
REJ10J1564-0104
2
2.9 Reset Module
This circuit controls the reset signal of SH7285 mounted on the M3A-HS85.
Figure 2.9.1 shows the block diagram of reset module in the M3A-HS85.
Figure 2.9.1 Block Diagram of Reset Module
2.10 Interrupt Switches
In the M3A-HS85, the push switches are connected with the pins NMI and IRQ1 of SH7285.
Figure 2.10.1 shows the block diagram of interrupt switch.
Figure 2.10.1 Block Diagram of Interrupt Switch