Roberts Gorden 10081601NA Rev H 12/11 - Manual (Page 44)

ROBERTS GORDON
®
ULTRAVAC™ C ONTROLLER I NSTALLATION M ANUAL
38 of 62
SECTION 6: ULTRAVAC™ BMS LINK CONTROLLER
6.1 ULTRAVAC™ BMS Link Controller Overview
Many customers have building management control
systems that manage multiple mechanical systems in
the building such as heating, ventilation, lighting, etc.
ULTRAVAC™ Controls run a stand-alone proprietary
program. With the addition of an ULTRAVAC™ BMS
LINK Controller, the ULTRAVAC™ system can com-
municate with third party building management con-
trol systems using BACnet
® or MODBUS ® protocol.
Communication of data points from the ULTRAVAC™
system to the building controls system help allow
building managers and end users to easily integrate
ULTRAVAC™ into a single controls solution shared
between multiple mechanical systems in the building.
ULTRAVAC™ BMS Link has an option of communi-
cating to the building control system via BACnet
® /IP,
BACnet ® MSTP or MODBUS ® protocol. The standard
ULTRAVAC™ BMS Link architecture is detailed on
Page 38, Figure 23.
FIGURE 23: Standard ULTRAVAC™ BMS Link Architecture