Ricoh G700 - Manual (Page 112)

110
A
ppendic
es
11
Problem Cause Solution Refer to
The image lacks natural
color. The picture was shot in conditions
that made it difficult for auto
white balance to adjust the white
balance. Add a white object to the
composition, or use a white
balance setting other than auto. P.63
The date or recording
information does not
appear on the screen. The screen display function is set
to no display. Press the DISP. button to change
the display. P.40
The brightness of the
picture display changes
during AF. Ambient lighting is poor or differs
from that used for autofocus.. This is normal. —
Vertical streaks
(“smear”) appear in
photos. Subject is bright. This is normal and does not
indicate a malfunction. —
The level indicator is
not displayed. [Level Setting] is set to [Off] or
[Sound]. Set [Level Setting] to [Display] or
[Disp + Snd]. P.42
The display is set to a setting other
than normal symbol display or
histogram. Press the DISP. button to change
the display to normal symbol
display or histogram. P.40
The camera is upside down (The
shutter release button is on the
bottom). Hold the camera correctly. —
The image is tilted even
though it was shot with
the level indicator in
the middle or while
the level sound was
sounding. You shot the image while moving,
such as on a amusement ride. Shoot in an environment that is
not moving. —
The subject is not level. Check the subject. —