Ricoh G700 - Manual (Page 28)

26
If y
ou ar
e using the c
amer
a for the first time
, r
ead this sec
tion.
Setting the Date and Time
1
Press the !"#$ buttons to set the year, month, date, time
and format.
• Change the setting with !" and move
the item with #$.
• You can cancel the setting by pressing
the DISP. button.
2
Check the information on the screen and then press the
MENU/OK button.
• The confirmation screen appears.
3
Press the MENU/OK button.
• The date and time are set.
• If the battery is low, a warning will be displayed. Use of a fully-
charged battery is recommended; to clear the warning from the
display, press MENU/OK.
Note -------------------------------------------------------------------------------------
• The language, date, and time can be changed at any time using the [Language/
N] and [Date Settings] items (GP.79) in the setup menu (GP.75).
• The [Date Imprint] item (GP.58) in the shooting menu (GP.55) can be used
to stamp photographs with the date and time of recording.
• If the battery is removed for more than three days, the date and time settings
will be lost. These settings must be made again.
• To retain the date and time settings, load a battery with adequate remaining
power for more than ten hours.