Using the self-timer, Start the timer – Ricoh G700 User Manual

Page 34

Advertising
background image

32

If y

ou ar

e using the c

amer

a for the first time

, r

ead this sec

tion.

Note

-------------------------------------------------------------------------------------

• The flash mode setting is retained until you press the F button again.
• The auxiliary flash fires to increase the AE accuracy.
• The flash can not be used in some shooting modes or with some shooting

menu options (GP.113).

Using the Self-timer

The camera offers a ten-second timer for self-portraits and a two-
second timer to prevent blur caused by camera movement when the
shutter-release button is pressed.

1

With the camera ready to shoot, press the t (Self-timer)
button.

• The Self-timer symbol appears on the

screen.

• The [10] to the right of the symbol

indicates the number of seconds. In this
case, if you press the shutter release
button, the camera will shoot after 10
seconds.

• Each press of the t button changes the self-timer setting in the

following order: 10 sec, 2 sec, and Self-timer Off.

2

Start the timer.

• Press the shutter-release button to lock focus and start the timer. If

the ten-second timer is selected, the AF auxiliary light will light.

Note

-------------------------------------------------------------------------------------

• The camera remains in self-timer mode even after the image is shot. To cancel

the self-timer, press the t button and change the self-timer setting to [Self-
Timer Off ].

• When the self-timer is set to 2 seconds, the AF auxiliary light does not blink.
• When the self-timer is set, the [Interval Shooting] setting is disabled.

4:3 F

3 F

4:3 F

4:3 F

9999

9999

9999

9999

4:3 F

3 F

4:3 F

4:3 F

9999

9999

9999

9999

Advertising