Ricoh G700 - Manual (Page 85)

83
7
Setup Men
u
Choose/Change Password
Choose the password that must be entered
to access password-protected settings
(GP.85). The password can be a barcode
or a phrase entered via an on-screen
keyboard.
Note -------------------------------------------------------------------------------------
The current password is required to change an existing password.
Barcode
Frame the barcode in the picture display and
press MENU/OK. If the camera can read the
code, it will set the password to the barcode
and return to the previous menu. Press DISP.
to exit without entering a new password. Read Barcode Read Barcode
Cancel Cancel Execute Execute
Aim the reader at the barcode
and press OK. Aim the reader at the barcode
and press OK.
Note -------------------------------------------------------------------------------------
The camera can read linear and matrix barcodes.
Linear Matrix (QR) Matrix (PDF417)
Caution ---------------------------------------------------------------------------------
You will be prompted to enter a password
whenever you attempt to access functions
protected using [Password Protection]. Frame
the password barcode in the picture display and
press MENU/OK. If the barcode is incorrect, a
message will be displayed; select [Yes] to return
to the password entry dialog. Read Barcode Read Barcode
Cancel Cancel Execute Execute
Aim the reader at the password
barcode and press OK. Aim the reader at the password
barcode and press OK.