User controls, On screen display (osd), How to operate – Ricoh PROJECTOR PJ S2130 User Manual
Page 29
28
English
User Controls
The Projector has a multilingual On Screen Display that allows
you to make image adjustments and change a variety of set-
tings. The projector will automatically detect the source.
How to operate
1.
To open the OSD, press “Menu” on the Remote Control or the key-
pad.
2.
When OSD is displayed, use keys to select any item in the
main menu. While making a selection on a particular page, press
key to enter sub menu.
3.
Use keys to select the desired item in the sub menu and
press “Enter” to adjust the settings by or key. To exit
from adjusting the item, press “Enter” again.
4.
If “to setting” word is shown in the setting, you can press “Enter”
to enter another sub menu. Press “Menu” to close the sub menu
after adjustment.
5.
After adjusting the settings, press “Menu” to go back to the main
menu.
6. To exit, press “Menu” again. The OSD will be closed and the pro-
jector will automatically save the new settings.
On Screen Display (OSD)
If no button operation
is made for 10 seconds,
the OSD will be closed
automatically.
Note
Sub Menu
Setting
Main Menu