Ricoh PROJECTOR PJ S2130 - Manual (Page 39)

38
English
User Controls
Default Settings 2 |
3D Projection
3D Projection
 Off: Choose “Off” to display normal (2D) picture.
 On: Choose “On” to display 3D format.
DLP Link
Select “On” to display 3D image viewing with DLP Link 3D glasses.
Optional sold 3D glasses uses DLP link system to synchronize with
the product. Set DLP Link “On” when the optional 3D glasses are
used.
L/R Reverse
 Normal: Choose “Normal” for default frame contents.
 Reverse: Choose “Reverse” to invert left and right frame con-
tents. Choose “Reverse” if viewing image is not natural or felt
3D incorrect.
 Compatible 3D
source, 3D content and
active shutter glasses
are required for 3D
viewing.
 “L/R Reverse” is
only available when
3D is enabled and this
mode 3D is for DLP
link glass only.
 This setting may need
to change when re-start
running 3D movie.
 HDMI input of the
projector does not
support 3D image
transmission in HDMI
standard. 3D image
can’t be displayed
when a 3D Blu-ray
disc player is directly
connected to the HDMI
terminal.
Note