Ricoh PROJECTOR PJ S2130 - Manual (Page 42)

English
41
English
Appendices
Problem: The screen of the Notebook or PowerBook com-
puter is not displaying a presentation
 If you are using a Notebook PC:
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way to be
reactivated. Refer to your computer’s documentation for detailed
information.
Problem: Image is unstable or flickering
 Adjust the “Phase” or “Frequency” to correct it. Refer to the “Im-
age Adjustment| Position” section for more information.
 Change the monitor setting from your computer.
 Check and reconfigure the display mode of your graphic card to
make it compatible with the product.
Problem: Image is out of focus
 Adjust the Focus Ring on the projector lens.
 Make sure the projection screen is between the required distance.
(refer to pages 26~27)
Problem: The image is stretched when displaying 16:9 DVD
Change “Aspect” by pressing the key on remote control or OSD
menu to show image with proper aspect ratio.
Problem: Image is too small or too large
 Adjust the Zoom lever on the top of the projector.
 Move the projector closer to or further from the screen.
 Press “Aspect” button on the remote control or press “Menu”
button on the projector panel, go to “Display Settings --> Aspect”
and try the different settings.